Circle C Products - Flat Cut-Out Acrylic Letters and Logos


Standard Styles / Standard Colors / Mounting Methods / Samples Flat cut acrylic letters are cut using high-speed lasers into standard typestyles or custom styles. Acrylic sheets are stocked in over 30 standard colors with custom color matching available. Thicknesses range from 1/8" to 3/4"

THICKNESSES:

1/8"

1/4"

3/8"

1/2"

3/4"

Because Your Acrylic Letters Should Be Good Looking On All Sides...

Polished edges, mirrored faces
High speed lasers create a small molten layer of acrylic that hardens almost instantaneously to provide a highly polished side return.

Choose your design or typestyle
We have the ability to duplicate virtually any design in acrylic up to 3/4" thick. The laser's precision cutting capabilities allow for incredible detail.

Laser cut for polished edges and mirrored faces.

Pentium powered computers paired with custom designed high-speed lasers, can precisely cut the most cost effective customized sign work in the industry.

Unless otherwise specified, all flat cut acrylic orders are cut with high speed lasers which produce a sharpness of cut unattainable by router cutting.

Trim Cap cannot be applied to Laser Cut Acrylic. If you are planning to use trim cap you must specify router cut, as the laser cut acrylic edges do not respond to adhesives.

In areas with either high U.V. exposure or where signage is subject to abnormal wear and tear; we would recommend the use of Formed Plastic or Metal letters due to the physical limitations of Acrylic. In some cases, large acrylic letters in thinner gauges may need to be manufactured in multiple pieces.