Circle C Products Home PageRequest QuoteInstall InstructionsContact Circle C Products
Cast Metal Letters & Logos
Cast Metal Plaques
Changeable Letters, Numbers & Word Plates
Flat Cut-Out Metal Letters & Logos
Formed Plastic Letters & Logos
Injection Molded Minnesota Letters
Flat Cut-Out Acrylic Letters & Logos
Channel Letters
Gem Brand Trimmed Letters & Logos
Lifetime Guarantee
Minnesota Letters - Injection Molded Plastic Letters & Logos

INJECTION MOLDED LETTER MOUNTING
Plain Mount

Plain Mount is no mounting hardware.
Stud Mount
 Stud Mount is a 3/16"diameter 10-24 stud coming out the back. You can request spacers to allow your letter to stand off the mounting surface. We would need to know how much of a standoff you would like. Pattern Needed!
Pad Mount
Pad Mount is a clear plastic pad in which you apply clear silicone adhesive and tape the letter up (6-12 hours) until the silicone has a chance to dry.
Combination Mount
 Combination Mount is a stud going through a pad on the top half of the letter and a pad mount on the bottom half. You would drill a 1/4" diam. hole to accomodate the stud. Fill hole with silicone and silicone the pad to the surface. Pattern Needed!
Combination All Mount
Combination All Mount is a stud going through a pad on all locations. You would drill a 1/4" diam. hole to accomodate the stud. Fill hole with silicone. Pattern Needed!